Frequently Asked Questions

Did you know …. Steam Management designs all its projects inhouse? 

Did you know .… Steam Management’s project managers are on-site full time, from kickoff to commissioning?   

Did you know …. Steam Management designs customized water conservation projects as well? 

Did you know …. Steam Management installs Pneumatic to DDC conversions for all size valves and actuators in any facility? 

Did you know …. Steam Management designs and installs customized indoor & outdoor insulation project for any size facility and any medium? 

Did you know ….  

Did you know ….    

Did you know ….  

Did you know ….    

  

Steam Systems –  

Did you know …. Steam systems provide the most efficient method of heat transfer? 

Did you know …. Manufacturing facilities can recapture energy by installing more efficient steam equipment and processes and applying energy management practices? 

Did you know …. If steam is pressurized, it will occupy less space? 

Did you know …. As long as the amount of steam being produced in the boiler is as great as that leaving the boiler, the boiler will remain pressurized? 

Did you know …. Steam should be as dry as possible to ensure it is carrying heat effectively? 

Did you know …. If the water level inside the boiler were not carefully controlled, the consequences could be catastrophic? 

Did you know …. A strainer should regularly be cleaned to avoid blockage? 

Did you know …. When air dissolves into condensate, it becomes corrosive? 

  

Steam Trap Monitoring –  

Did you know …. Data can be transmitted over cellular networks to lower system cost less expensively? 

Did you know ….  

Did you know ….    

Did you know ….  

Did you know ….  

Did you know ….    

  

Insulation & RICs –  

Did you know …. Uninsulated steam distribution and condensate return lines are a constant source of wasted energy? 

Did you know …. Any surface over 120°F should be insulated, including boiler surfaces, steam and condensate return piping, and fittings? 

Did you know ….  

Did you know ….    

  

Control Valves –  

Did you know …. The common chilled water actuator motor is generally powered by 24 volts AC 

Did you know ….  

Did you know ….  

Did you know ….    

  

HVAC Heat Recovery –  

Did you know …. Recovering condensate instead of throwing it away can lead to significant savings of energy, chemical treatment and make-up water?  

Did you know ….  

Did you know ….  

Did you know ….    

  

 

 

Questions? Contact Us: